Landoll 330B, Operator'S Manual, Page: 31 / 64

4-3
NORMAL OPERATING SERVICE INTERVALS
a
SERVICE
INTERVAL :
ITEM
TIMES 1st 5
Hrs
Weekly Monthly 6
Months
Yearly LUBE # NOTES
MILES 50 500 2,000 12,000 25,000
LIGHTS I I
WIRING & CONNECTIONS I I
FASTENERS I, T I b
KING PIN & PLATE I C, I, L 3 c
BRAKE AIR SYSTEM I I I
RELAY VALVES I, C
BRAKE ADJ & WEAR I I, T d
SLACK ADJUSTERS I I L 3 c
CAMSHAFT ASSYS I I L 3 c
HUB OIL I I, L R 5 c
WHEEL BEARINGS I I, T 5 c
TIRE INFLATION & WEAR I I e
WHEEL LUG NUTS I, T I I, T f
SUSPENSION ALIGNMENT I I
UNDERCARRIAGE ROLLERS L 3 c
HYDRAULIC OIL I I R 1 c
HYDRAULIC FILTER R R
HOSES I I R
WINCH GEAR CASE I I 2 c
I – Inspect, R – Replace, T– Tighten/ Adjust Torque, L – Lubricate, C – Clean
NOTES:
a. Perform at the time shown. Shorten service intervals when operating in severe or dirty conditions.
b. See Table 2-1 (Bolt Torque Chart) for correct torque.
c. See Table 4-1 (Lube Specification Chart) for recommended lubricant.
d. Call Landoll Customer Services for procedures to replace.
e. See Serial Number Plate on the front of the semitrailer for proper inflation requirements.
f. See Figure 4-18 , Stud Tightening Sequence.
Table 4-2 Maintenance Schedule
(Inspect & Replace as needed)
I,