Landoll 330A, Operator'S Manual

Page: 56 / 62

SYMPTOM PROBLEM: REMEDY
OIL FOAMY Oil is low: Add or replace oil.
Wrong oil type: Replace oil.
Foamy oil: Add or replace oil.
Water in oil: Replace oil.
Air leaks: Check suction line and component seals for
suction leaks. Replace defective parts.
NOISY PUMP Oil is low: Add or replace oil.
Wrong oil type: Replace oil.
Foamy oil: Add or replace oil.
Suction line plugged: Clean out obstruction or replace
line. Flush system, replace filter.
Pump damaged: Repair or replace.
LEAKY PUMP Damaged or worn shaft seal: Replace seal and/or shaft.
Check for misalignment.
Loose or broken parts: Tighten or replace.
CYLINDERS MOVE WITH
CONTROL VALVE IN NEUTRAL POSITION
Leaking cylinder seals or fittings: Replace worn seals or
fittings.
Control valve not centering when released: Check
linkage for binding, repair or replace as needed.
Valve damaged: Repair or replace.
CONTROL VALVE LEAKS Seals damaged or worn: Replace.
CYLINDER LEAKS Seals worn or damaged: Replace.
Rod damaged: Replace.
Barrel damaged: Replace.
CYLINDERS DO NOT FUNCTION, OR CREEP
WITH PTO DISENGAGED
Leaking fittings or cylinder seals: Tighten loose fittings,
replace seals. Replace worn seals or fittings.
5-2 HYDRAULIC POWER SUPPLY ENGINE PACKAGE
To troubleshoot the engine in the hydraulic engine package, please refer to the owners manual that
was provided with the engine package.
5-2
Hydraulic System, Continued