9
REMOVING THE SHELVES
1. Open the door completely. The door must be able to open at least 90 degrees for the shelves to properly clear the door gasket.
2. Holding both the left and right sides of the shelf you intend to remove, lift the front up out of the key slot on the front vertical tracks. Then pull
the shelf out of the cabinet and towards you. See step "
A
" below.
3. Pull the shelf approximately 1/3 out of the refrigerator cabinet. The rear shelf pegs will disengage from the rear vertical tracks as shown in step
"
B
" below. With the front of the shelf angled 20 degrees above the back of the shelf, pull the shelf forward until it is completely removed from
the cabinet.
TIP
To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out of their track.
NOTE
The refrigerator may experience decreased cooling efficiency if air flow is restricted due to a fully loaded cabinet. Additionally, placing
hot beverages into the refrigerator will put extra strain on the cooling system and is not recommended.
A
B
