Landmann PROFESSIONAL 43110, Assembly, Care And Use Instructions, Page: 46 / 52

Natural Gas Conversion
ï
- First, make sure all control knobs are in the OFF
position, LP tank valve is closed, and tank is
disconnected from regulator and removed from grill.
- Next, open Lid and remove Warming Rack,
Cooking Grates, and Flame Tamers.
Warming rack
Flame Tamers
Cooking Grates
î
ó
Using pliers remove R pins from above flame crossers
ó λ³±ª»
Flame crossers
R-pin
Flame cross ers
3
- Using pliers remove R pins and main burner
pins from burners.
R-pin
Main burner pins
Main burners
ÐßÎÌÍ Ô×ÍÌñÜ×ßÙÎßÓ
7mm wrench
Pliers Adjustable wrench
Phillips screw driver
1 Natural
Gas Hose
(not inclided)
1 5
1 5
4 6
Natural Gas Orifices
- See diagrams on next page for your specific model
1 Orifice
Removal Tool
WARNINGS & CAUTION:
FOR OUTDOOR USE ONL . Y
Turn o
ff
NG supply at piping when the appliance is
not in use.
Use only the gas pressure regulator supplied with this
appliance.
This regulator is set for an outlet pressure of 4” W.C.
If the informa on above is not followed exactly, a fire
causing death or serious injury may occur. Do not use
this appliTools required for assembly:ance under over
head combus ble. surfaces.
Only for Installa on in a Built-in enclosure constructed
of non-combus ble materials. Minimum clearance
from side and back of unit to combus ble
construc on 36” from sides and back.
Tools required for assembly:
Conversion label