Landmann Miton PTS 3.1, Assembly And Operating Manual

Page: 11 / 28

11
Miton PTS 3.1
Switching off the barbecue
1. Close the cylinder valve on the gas cylinder.
2. Press and turn all flame regulators (B) clockwise
to "OFF".
3. Wait until all of the parts have cooled down and
then clean any soiled components (see chapter
"Cleaning").
4. Close the lid on the grill unit.
5. If the barbecue is not going to be used for a pro-
longed period:
– Disconnect the gas cylinder (see chapter "Dis-
connecting the gas cylinder").
– Store the barbecue in a dry place.
Cleaning
Barbecue
Danger: Risk of burns when cleaning the
hot barbecue
Some parts of the barbecue can get very hot.
Allow the barbecue to cool down sufficiently
before cleaning it. Wear protective gloves.
Caution: Spark plug on burner can be
bent
The spark plugs on the burner can be bent or
snapped off while cleaning the burner areas. In
this case, the gas in the burner will not ignite. For
this reason, clean the areas around the burners
with particular care.
To make sure that you enjoy your barbecue for many
years, you should always clean it after use – after
making sure that all the parts have cooled down –
with detergent, a brush and a cloth. It will be much
harder to do this later, once the dirt has dried.
Gas system
The gas outlet nozzles on the adjusters (underneath
the front panel) can be cleaned with a pin if neces-
sary.
Warning: Risk of fire and explosion
All other parts through which gas is transferred
should only be cleaned by an expert.
Never dismantle the adjusting elements!