Landmann Atracto, Assembly And Operating Manual, Page: 11 / 26

13 1244202
Igniting the side burner (14)
Caution:
Please note that a gas flame is often difficult
to see due to its blue colouring, particularly in
bright sunlight. Therefore:
– Only ignite the side burner when you need
it and place your cookware on the burner
straight away.
– Disconnect the gas supply before removing
your cookware.
– Only use cookware (pots or pans) on the
side burner that has been approved for
use on gas cooking appliances. Cookware
that is unsuitable for gas appliances may be
damaged.
• Observe the maximum load capacity for the
storage shelf and the side burner (see Techni-
cal Specifications). Heavy loads can damage
the barbecue.
1. Make sure that the side burner support (15) is in
place.
You must not use the side burner without the side
burner support.
Keep as great a distance as possible from the side
burner (14) during the next steps.
2. Press and turn the flame regulator (C) anti-clock-
wise to "HIGH" ("large flame"). Hold it in this
position for a couple of seconds.
3. Press the Piezo igniter (A), if necessary repeatedly,
until the gas is ignited.
A clicking sound indicates that the Piezo igniter is
lighting.
If the gas fails to ignite within 5 seconds, turn the
flame regulator (C) to "Off" position, wait for 3
minutes and repeat steps 2 and 3.
Turn the flame regulator (C) to the desired heat
setting (flame size), place a pot or pan that is
approved for gas cooking appliances on the side
burner and heat up your food.
To switch off the side burner (extinguish the flame)
press and turn the flame regulator (C) clockwise to
"OFF".
regulator (B) to the selected setting (flame size).
7. You can now place your food on the grill (9). We
recommend that you wear barbecue gloves or
other suitable gloves for protection against the
heat.
Switching off the barbecue
1. Close the cylinder valve on the gas cylinder (turn
the operating lever (G2) to 3 o'clock position).
2. Press and turn all flame regulators (B, C) clockwise
to "OFF".
3. Wait until all of the parts have cooled down and
then clean any soiled components (see chapter
"Cleaning").
4. Close the lid on the grill unit.
5. If the barbecue is not going to be used for a pro-
longed period:
– Disconnect the gas cylinder (see chapter "Dis-
connecting the gas cylinder").
– Store the barbecue in a dry place.