Landmann 42235, Assembly, Care And Use Instructions, Page: 15 / 24

15
Connecting Gas Cylinder
Installing 16.4 ounce disposable propane
cylinder
NOTE: Your protable Pantera is set up from factory
to use a 16.4 ounce disposable propane cylinder.
Before attaching propane cylinder make sure the
control knob is in the OFF position.
Remove plastic cap from top of propane cylinder
and screw cylinder into regulator hand tight.
1. Disconnect the propane cylinder from the
regulator valve when the grill is not in use.
2. DO NOT obstruct the flow of combustion air
and ventilation air to the grill.
Use only the gas specified.
Keep the grill on a level surface.
Keep the grease cup empty at start up.
Checking for Leaks
1. Make 2-3 oz. of leak solution by mixing one part
liquid dishwashing soap with three parts water.
2. Make sure the control knob is in the OFF
position.
3. Spray some solution on the tank valve up to the
valve connection.
4. Inspect the solution at the connections for
bubbles. If no bubbles appear, the connection is
secure.
5. If bubbles appear, you have a leak. Go to step 6.
6. Disconnect the regulator from the tank and
reconnect. Make sure the connection is tight and
secured.
7. Retest with solution.
8. If “growing” bubbles appear do not use or move
the LP cylinder. Contact an LP gas supplier or
your fire department!
To prevent fire or explosion hazard
when testing for a leak:
1.
ALWAYS
perform the 'leak test'
before lighting the grill and each time
the cylinder is connected for use.
2. DO NOT smoke or allow other
sources of ignition in the area while
conducting a leak test.
3. Conduct the leak test outdoors in a
well-ventilated area.
4.
DO NOT
use matches, lighters or a
flame to check for leaks.
5. DO NOT use grill until all leaks have
been stopped. If you are unable to
stop a leak, disconnect the propane
supply, call for gas appliance service
or your local propane gas supplier.