Operator Manual S755 (G2) / S755 XL (G2)
October 2017
Landis International - 12
TO CHANGE THE MINI BELT
(IN OPTION)
1.
You will need to use the lock tool at first to secure
and lock the shaft. (SKU: TBSHC)
2.
Remove the screw (SKU: 83102220) (left hand thread)
and the washer (SKU: SCT).
3.
Pull the rubber wheel out of the shaft.
4.
Change the sandpaper belt.
5.
Reverse procedures to reassemble.
TO ADJUST THE TRIMMER SHIELD (GSL)
1.
Use an Allen key, provided, to release the shield (1/8
’’).
2.
The trimmer shield should
n’t
touch cutter,
turn set screw clockwise to move Shield
outward. Make adjustment to keep a small
gap between the shield and the cutter.
3.
Adjust the trimmer shield up or down as
necessary. Turn knob counter clockwise
to raise shield vertically.
✓
Maintenance
is important, see our recommendations page 19-21.
Mini belt
TMS001002MA