Information Functions
Review
27/27
Cashpower Gem Lite
–
User Guide
© Gyr (Pty) Ltd
5.1.27 Total Units Counter (10 Wh Resolution) (Register 061)
The meter displays the total kWh consumed, with a resolution of 0.01kWh, since the meter was put into service.
5.1.28 Last fifty 20 digit numbers entered into the meter
Meter stores the last fifty 20 digit STS numbers entered into the meter in fifty separate registers.
The meter displays the 20 digit STS number scrolling from right to left,
followed by the date and time stamp which indicates when the token was
created at the vending system (Date & time format is DDMMYYYY hhmm)
Register 301
Last 20 digit token entered
Register 302
2nd Last 20 digit token entered
Register 303 to Register 349
–
3rd last to 49th last token entered
Register 350
50th last token entered
A display of 0000 0000 0000 0000 0000 implies that the register does not
contain a record of an STS token.
5.1.29 Customer Information Mode
The Customer Information Mode is entered via info-register 600.
On entering the Customer Information Mode, meter will display as follows:
All lines on the display (typical information mode display)
Information mode icon flashing
Now enter the register number in the table below
Code
Function
000
test all
001
open the disconnect-device
002
switch all LCD segments on and flash the rate LED
004
display total units counter
005
display key revision and key type
006
display tariff index
007
display power limit level
008
display the meter tamper status
009
display available credit
030
display the meter supply group code
050
instantaneous power
100
display the meter number
101
display the software version number
102
display the VTC mapping number
200
display value of last credit token
201
display id of last credit token
