13. Open
hardware bag
"STEP 3".
Connect the crank
arm to the crank.
Tighten the top two
bolts first, then the
bottom two.
DO
NOT REMOVE
the
plastic film. It is an
isolation dampener
that alleviates
mechanical stress
between joints.
14. Open
hardware bag
"STEP 4".
Connect the pedal
arm to the vertical
member. Slide the
bolt in from the
outside and tighten
the nut very firmly.
NOTE: There is a
difference between
right and left
pedals ("L" / "R"
decals).
15. Use the black
screws in the
hardware bag
"STEP 4". Push
the pedals forward
and screw on the
inside plastic joint
covers.
TIP: You
must hold the
pedal in the
forward position
in order to get a
screw driver in a
usable position
.
16. Use the
remaining black
screws in the
hardware bag
"STEP 4". Fasten
the outside plastic
joint covers.
