Installation
34
Figure 2-14. Console Assembly Bolts
17. Confirm all four treadmill feet are touching the ground. If
necessary, loosen the 19mm and 14mm nuts using open
end or adjustable wrench, until foot touches the floor.
(Figure 2-15).
Figure 2-15. Leveling Feet
18. Place a level across the rear of the machine and stand in
the middle of the running surface, facing the rear of the
treadmill. Check if the bubble is centered on the level.
M6X75 (4x) Button
Head Cap Screws
Increases Height
19mm Jam Nut
14mm Adjustment Nut
Decreases Height
