Upright Bike Assembly
31
8. With rear cover in place, position front cover so both plastic
mounting inserts go through the cross bar access holes.
Secure with (2) #28 cross head screws. Do not over tighten
or plastic components may be damaged. (Figure 3-5).
Figure 3-5. Console Front Finishing Cover Installation
9. Install Bottle Holder onto upright tube. Secure with (4) #21
M5x15 cross head screws (Figure 3-6).
Figure 3-6. Bottle Holder Installation
10. Locate seat cushion in accessory box. Remove (3) #13
nylock nuts and (3) #13 flat washers from seat cushion.
cross head
screws
(2x)
Rear
Cover
Front
Cover
M5x15 Screws,
both sides (4x)
