CA01B.C01
Service instructions, mixer type POPR-I
Page 5/7
Landia Inc.
Issued on: 01 March 1997
Cary, NC 27513
Rev. date: 24 October 2018
Executed by: AJ/BNV
Accepted by: SL/KT
H:
Grease chamber
I:
Wear bushing
J:
Grease nipple
K:
Grease chamber
L:
Spacer
M:
Oil sealing ring
The oil level is to be checked by removing the upper oil plug pos. A. The oil has to be clean and the level has to
reach the plug hole. Oil type: see spare parts list. If the oil is dirty it has to be exchanged.
The oil is drained off by dismounting the plug pos. B. If the oil is dirty inspect seals and wear bushings.
Oil is filled at oil plug pos. A on the gear.
Lubricate the outer sealing system with grease (see spare parts list). This takes place by removing the stop screw
pos. C placed right behind the propeller hub and then pump grease through the grease nipple.
Prior to re-mounting the propeller, fill up the hub with grease.
