9.800-087.0 • 8.941-124.0 • 8.941-459.0 • 8.919-016.0 • Rev. 02/17
7
PRESSURE WASHER
OPERATOR’S MANUAL
OPERATING INSTRUCTIONS
STEP 8:
On Honda engines, turn the engine switch to
"On" position.
On Briggs engines, move the throttle lever to "Fast"
position, shown on engine as a rabbit.
STEP 9:
Pull the starter grip. If the engine fails to start
after 2 pulls, squeeze the trigger gun to release pressure
and repeat step. Return starter gently. After the engine
warms up enough to run smoothly, move choke to run
position and throttle to fast position.
CAUTION: Small engines may kick back. Do not
hold pull starter grip tightly in hand.
WARNING! Never replace
nozzles without engaging
the safety latch on the spray gun
trigger.
Safety
Latch
The two color-coded quick connect
nozzles are easily accessible when
placed in the convenient rubber
nozzle holder, which is provided on
the front of the machine.
NOTE:
To rinse, select the yellow.
To apply detergent select the black
nozzle.
NOZZLES
On-Off
Switch
