12
Maintenance
Preventative Maintenance
This trailer was produced with the best available materials and quality craftsmanship. However, you as the owner,
have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance
procedures will assist in preserving the performance of your equipment.
Axles, Hubs and Brakes
Your Landa trailer is equipped with Dexter Component Axles. The Dexter Owner's Manual is included in the
materials received with your trailer. Maintenance for axles, hubs and brakes is extremely important for protecting
the longevity of your trailer. It is extremely important for your personal safety and the protection of others. Follow the
Dexter service recommendations exactly as described.
Please, never shortcut axle, hub and brake service and maintenance.
MAINTENANCE SCHEDULE
Tire Air Pressure
Inflate to proper pressure indicated on sidewall
Every Trip
Wheel Lugs, Bolts & Nuts
Tighten to proper torque specifications
Every 3000 mi or 3 mos.*
Wheel
Check for damage and or out-of-round
Every 6000 mi or 6 mos.
Coupler Ball
Check for sufficient lube.
Check lock mechanism.
Check for unusual wear.
Every trip
Safety Chains at Hitch Ball
Check for abrasion, distortion and general integrity
of links.
Every trip
Coupler
Check for proper fastening & hitch pin in position
and secure.
Every trip
Brakes
Check for proper adjustment & operation
Every trip
Breakaway Switch
Test switch operation and connections
Every trip
Breakaway Battery
Pull switch pin, check charge indicator light
Every trip
Load Distribution
Check load distribution & security
Every trip
Leveling Jacks
Check fastenings. Lube.
Every trip
Welds
Check all weld beads for cracks or separations
Every 6000 mi. or 6 mos.
Hinges
Grease zerks with a Lithium complex grease
Every 3000 mi. or 3 mos.
Tie Down Devices
Check for fracturing, distortion and improper
anchoring.
Every 3000 mi., or 3 mos.
Electrical: Lights & Signals
Check to make sure all are working properly.
Replace burned out bulbs.
Every trip
*
Check lug nuts for tightness before initial trip, at 10 miles, 25 miles and 50 miles. Recheck at least every 3
months or 3000 miles
Landa TR 3500 / 6000 Operator’s Manual 8.913-956.0 - P
