Landa SLT/SLX • Gas 8.914-002.0 • Rev. 4/13
OPERA
TOR’S MANU
AL
PRESSURE W
ASHER
8
89140020-21
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach a 5/8" water supply
hose to inlet connector. Minimum
flow should be 10 GPM depending
on model of machine.
STEP 3:
Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage.
STEP 7:
Check oil level by using
supplied dip-stick. Use SAE20/40W
non-detergent only.
STEP 2:
Attach high pressure hose
to discharge nipple using quick
coupler. Lock coupler securely by
pulling back coupler collar, inserting
onto discharge nipple and pushing
collar forward until secure.
STEP 8:
Fill gasoline tank and
check engine oil level. Fill fuel oil
tank. Do not confuse gasoline and
fuel oil tanks. Keep proper fuel in
proper tank.
STEP 5:
Before installing nozzle, turn
on water supply and run machine al-
lowing water to flush through the sys-
tem until clear. Pull the spring-loaded
collar of the wand coupler collar back to
insert your choice of pressure nozzle.
Caution: Never replace nozzles with-
out engaging the safety latch on the
spray gun trigger.
STEP 9:
Install proper battery
making sure that the red cable is
attached to the positive terminal.
Use a 12V group 24 style battery.
89140020-17
Garden
Hose
Water
Inlet
89140020-2
High
Pressure
Hose
Discharge
Nipple
89140020-18
Trigger
Gun
High Pressure
Hose
89140020-20
High
Pressure
Nozzle
89140020-22
Dipstick
89140020-8
89140020-23
Collar
Wand
Safety
Latch
STEP 4:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
89140020-19
High
Pressure
Hose
Spray Gun
STEP 6:
Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Wand
Collar
High
Pressure
Nozzle
Fuel
Oil
Tank
Gasoline
Tank
Red
Cable
