background image

6

Safety

WARNING: To reduce the risk of 
injury, read operating instructions 
carefully before using.

AVERTISSEMENT: Pour réduire le 
risque de blessures, lire attentive-
ment les instructions de 
fonctionnement avant l'utilisation

1. Read the engine and this 

owner's manual thoroughly. 

Failure to follow instructions could cause malfunc-
tion of the machine and result in death, serious 
bodily injury and/or property damage.

2. Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

3. Stay alert — watch what you are doing.

WARNING: Keep wand, hose, and 
water spray away from electric 
wiring or fatal electric shock may 
result.

AVERTISSEMENT: Garder la 
lance, le boyau et le jet d'eau à 
l'écart de tout câblage électrique 
ou des chocs électriques mortels 
pourraient survenir

4. All installations must comply with local codes. 

Contact your electrician, plumber, utility company 
or the selling dealer for specific details.

WARNING: This machine exceeds 
85 db appropriate ear protection 
must be worn.

AVERTISSEMENT: Cette machine 
excède 85 dB et une protection de 
l'ouïe appropriée doit être portée.

WARNING: High pressure spray 
can cause paint chips or other 
particles to become airborne and 
fly at high speeds. To avoid 
personal injury, eye, hand and 
foot safety devices must be worn.

AVERTISSEMENT: Un jet haute 
pression peut écailler la peinture 
ou provoquer l'émission d'autres 

particules dans l'air et leur projection à hautes 
vitesses. Pour éviter les lésions corporelles, une 

protection des yeux, du visage, des mains et des 
pieds doit être portée lors de l'utilisation de cet 
équipement.

5. Always wear properly rated eye protection such as 

safety goggles or face shield while spraying. 

(Safety glasses do not provide full protection).

6. Keep operating area clear of all persons.

WARNING: Flammable liquids can create fumes 
which can ignite, causing property damage or 
severe injury.

AVERTISSEMENT: Des liquides inflammables 
peuvent produire des vapeurs qui peuvent 
s'enflammer, causant ainsi des dommages à la 
propriété ou des blessures graves.

WARNING: Risk of explosion — 
Operate only where open flame or 
torch is permitted.

AVERTISSEMENT: Risque d'explo-
sion- Utiliser uniquement dans 
des endroits où l'utilisation d'une 
flamme nue ou d'une torche est 
permise.

WARNING: Risk of fire — Do not 
add fuel when the product is 
operating or still hot. 

VERTISSEMENT: Risque 
d'incendie -Ne pas ajouter de 
carburant pendant que la machine 
fonctionner ou est encore chaude.

WARNING: Do not use gasoline 
crankcase draining or oil 
containing gasoline, solvents or 

alcohol. Doing so will result in fire and/or explo-
sion.

AVERTISSEMENT: Ne pas utiliser d'essence, de 
drainage du carter de moteur ou d'essence 
contenant de l'huile, de solvants ou de l'alcool. 
Agir de la sorte risquerait de créer un incendie et/
ou une explosion.

WARNING:   Risk of fire — Do Not spray flammable 
liquids. 

AVERTISSEMENT: Risque d'incendie - Ne pas 
pulvériser de liquides inflammables.

7. Allow engine to cool for 1-2 minutes before refu-

eling. If any fuel is spilled, make sure the area is 
dry before starting the engine. (Fire and/or 
explosion may occur if this is not done.)

Landa SLT/SLX Kubota Diesel Operator’s Manual  9.807-540.0 - E

WARNING

    READ OPERATOR’S 

 MANUAL THOROUGHLY 

           PRIOR TO USE.

OPERATIONS

SAFET

Y

MAINTENANCE

DANGER

       

KEEP WATER 

 SPRAY AWAY FROM 

ELECTRICAL WIRING.

WARNING

EAR PROTECTION

MUST BE WORN

WARNING

    USE PROTECTIVE 

  EYE WEAR 

AND CLOTHING

WHEN OPERATING

 THIS EQUIPMENT.

WARNING

RISK OF EXPLOSION: 

OPERATE ONLY WHERE 

OPEN FLAME OR TORCH 

IS PERMITTED

WARNING

RISK OF FIRE. 

DO NOT ADD FUEL 

WHEN OPERATING

MACHINE.

Summary of Contents for SLT Series



























Reviews: