background image

96-61836  •  LANDA MVC  •  REV. 11/04

27

 PRESSURE W

ASHER 

 W
ARRANTY

LANDA LIMITED NEW PRODUCT WARRANTY

PRESSURE WASHERS

WHAT  THIS  WARRANTY  COVERS

All LANDA pressure washers are warranted by LANDA to the original purchaser to be free from defects in materials and
workmanship under normal use, for the periods specified below. This Limited Warranty is subject to the exclusions shown
below, is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced
under this warranty will assume the remainder of the part’s warranty period.

FIVE YEAR  PARTS  AND  ONE  YEAR  LABOR  WARRANTY:

Components manufactured by LANDA, such as frames, handles, top and bottom wraps, float tanks, fuel tanks, belt guards,
and heating coils.  Internal components on the oil-end of LANDA pumps have a 7 year warranty.

ONE  YEAR  PARTS  AND  ONE  YEAR  LABOR  WARRANTY:

All other components, excluding normal wear items as described below, will be warranted for one year on parts and labor.
Parts and labor warranty on these parts will be for one year regardless of the duration of the original component manufacturer’s
part warranty.

WARRANTY  PROVIDED  BY  OTHER  MANUFACTURERS:

Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these manu-
facturers’ local authorized service centers. LANDA is not authorized and has no responsibility to provide warranty service for
such components.

WHAT  THIS  WARRANTY  DOES  NOT  COVER

This warranty does not cover the following items:

1.

Normal wear items, such as nozzles, spray guns, discharge hoses, wands, quick couplers, seals, filters, gaskets, O-
rings, packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.

2.

Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper
servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated
usage specifications as contained in the operator’s manual.

3.

Damage due to freezing, chemical deterioration, scale build up, rust, corrosion, or thermal expansion.

4.

Damage to components from fluctuations in electrical or water supply.

5.

Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.

6.

Transportation to service center, field labor charges, or freight damage.

WHAT  YOU  MUST  DO  TO  OBTAIN  WARRANTY  SERVICE

While not required for warranty service, we request that you register your LANDA pressure washer by returning the com-
pleted registration card. In order to obtain warranty service on items warranted by LANDA, you must return the product to your
Authorized LANDA Dealer, freight prepaid, with proof of purchase, within the applicable warranty period. If the product is
permanently installed, you must notify your Authorized LANDA Dealer of the defect. Your Authorized LANDA Dealer will file
a claim with Landa, who must subsequently verify the defect. In most cases, the part must be returned to LANDA freight
prepaid with the claim. For warranty service on components warranted by other manufacturer’s, your Authorized LANDA
Dealer can help you obtain warranty service through these manufacturers’ local authorized service centers.

LIMITATION  OF  LIABILITY

LANDA’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall LANDA’S
liability exceed the purchase price of the product in question. LANDA makes every effort to ensure that all illustrations and
specifications are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular
purpose, or that the product will actually conform to the illustrations and specifications. Our obligation under this warranty is
expressly limited at our option to the replacement or repair at a service facility or factory designated by us, of such part or parts
as inspection shall disclose to have neen defective.

 THE WARRANTY CONTAINED HEREIN IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCANTABILITY OR FITNESS
FOR  A  PARTICULAR  PURPOSE  ARE  EXPRESSLY  LIMITED TO THE  DURATION  OF THIS WRITTEN WARRANTY.

 LANDA

does not authorize any other party, including authorized LANDA Dealers, to make any representation or  promise on behalf
of LANDA, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the
installation and use of LANDA products conforms to local codes. While LANDA attempts to assure that  its products meet
national codes, it cannot be responsible for how the customer chooses to use or install the product. Some states do not allow
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.

LANDA

www.landa.com  •  1-360-833-9100  •  1-800-547-8672

P R E S S U R E   W A S H E R S

®

To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

Summary of Contents for MVC4-3000





























Reviews: