![background image](http://html1.mh-extra.com/html/landa/ehw4-2000c/ehw4-2000c_operators-manual_3586026026.webp)
8.941-114.0 • LANDA EHW • Rev. 08/12
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
26
HANDHELD WIRELESS OPERATING INSTRUCTIONS
For Wireless Remote Control Operation
Step 1:
Push the control panel pump switch to the "ON"
position (first click). With the switch in this position the
wireless remote is ready for use.
Step 2: To control pressure washer
in remote mode, press transmit-
ter button 1 to turn pump "ON".
Press transmitter button 2 to turn
pump "OFF". Pump can also be
controlled manually by pressing
the control panel pump ON/OFF
switch.
Chemical 1: To start chemical
1 flow, press transmitter button
3. The green indicator light will
illuminate when chemical 1 is in
use. Press button 3 again to stop
chemical 1 flow.
Chemical 2: To start chemical 2 flow, press transmitter
button 4. The green indicator light will illuminate when
chemical 2 is in use. Press button 4 again to stop
chemical 2 flow.
When machine is not in use, push control panel pump
switch to the "OFF" position. Store transmitter on the
transmitter bracket.
NOTE: Normal operating range for the transmitter is
about 500 feet interference-fee (line of site); 300 feet
light interference (inside warehouse, pallet shelves);
and 100 feet heavy interference (through concrete/
stone walls, metal doors). If greater range is desired,
the antenna can be mounted at a separate location.
This requires a longer cable - RG-58-U coaxial with
BNC end connectors.
Transmitter
Pump Switch
Transmitter
Bracket
Chemical 2
Light
Chemical 1
Light
Summary of Contents for EHW4-2000C
Page 34: ......
Page 36: ...Form 8 941 114 0 Revised 08 12 Printed in U S A...