Land Pride TB25108, Operating Manual

Page: 13 / 30

11
Section 2: Optional Equipment Set-up
11/26/14 TB2596 & TB25108 Trip Blade 301-291M
Table of Contents
Deflector Flap Assembly
Figure 2-2
26912
Orange Markers
Refer to Figure 2-1:
Land Pride offers 28" tall orange markers that can be
bolted to both sides of the moldboard. They are ideal for
being able to locate the outer ends of the blade when
approaching buildings, trees, poles, and other obstacles
that could be damaged and/or damage the Trip Edge
Blade when hit.
1. Attach 28" orange marker (#4) to outer left edge of
moldboard (#1) with two 5/16"-18 x 1" GR5 hex head
cap screws (#2) and hex nylock nuts (#3).
2. Tighten nuts to the correct torque.
3. Repeat steps 1 and 2 for the right side.
Steel And Poly Blades
Refer to Figure 2-2:
Land Pride offers two types of cutting blades (#1) (steel &
poly) for the Trip Edge Blade. Use the steel blade for
tougher applications and the poly blade for applications
where you want to be more gentle on the surface being
bladed such as concrete parking lots. See “Blade
Removal and Installation” instructions on page 18
when changing blades.
Deflector Flap
Refer to Figure 2-2:
Land Pride offers a 12" wide Deflector Flap mounted on
the moldboard to help keep snow from flying over the
moldboard and into the operator cab.
1. Attach 12" wide deflector flap (#4) to the top front
flange of the moldboard (#5) with deflector backing
bar (#1), ten 3/8"-16 x 1" GR5 hex flange screws
(#2), and hex flange lock nuts (#3).
2. Tighten nuts to the correct torque.
Section 2: Optional Equipment Set-up
Orange Marker Assembly
Figure 2-1
Part Number & Description
Orange Markers
301-290A Orange Marker Package
Steel And Ploy blades
301-274A TB2596 Steel Cut Edge Package
301-275A TB2596 Poly Cut Edge Package
301-271A TB25108 Steel Cut Edge Package
301-272A TB25108 Poly Cut Edge Package
Deflector Flap
301-306A TB2596 Deflector Package
301-305A TB25108 Deflector Package
26901