Introduction
SSP2510, & SSP2512 Snow Pusher 303-348M
4/15/19
9
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Snow Pusher have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, seeFigure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Snow
Pusher. If for any reason you do not understand any part of this
manual or are not satisfied with the service received, the
following actions are suggested:
1.
Discuss any problems you have with your attachment
with your dealership service personnel so they can
address the problem.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
NOTE:
A special point of information that the
operator should be aware of before continuing.
37033
Land Pride welcomes you to the growing family of new
product owners. This Snow Pusher has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this machine.
Application
Land Pride’s SSP25 Series Snow Pushers are available
in popular sizes to fit your skid steer or tractor loader
equipped with a universal Quick-Attach hitch. They are
designed to push snow and other loose materials straight
ahead without leaving windrows on the side or damaging
the pavement below when using the optional rubber
snow blade.
The 25 Series is offered in 10' and 12' model widths with
3/16" moldboard and 5/16" x 35" tall side panels. The
models are equipped with AR400 skid shoes that are
adjustable, reversible, and replaceable. The customer
can choose between the optional 8" rubber snow blade
or optional 1/2" x 6" steel blades. The rubber snow blade
is designed to help eliminate pavement damage and
damage to lot striping on most surfaces.
The customer may also choose to add the optional pull
back feature on the SSP2510 model for removing snow
close to garage doors. Orange markers are available on
both models as an accessory to assist in locating the
outer ends of the Snow Pusher.
See
“Specifications & Capacities”
on page 22 and
“Features & Benefits”
on page 23 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
