Land Pride SSP2510, Operator'S Manual, Page: 25 / 30

Section 4: Maintenance
Table of Contents
SSP2510, & SSP2512 Snow Pusher 303-348M 4/15/19
21
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1. Clean off any dirt that may have accumulated on the
Snow Pusher. Scrape off compacted dirt and then
wash surfaces thoroughly with a garden hose.
2. Inspect Snow Pusher for loose, damaged, or worn
parts. Adjust and tighten loose parts. When needed,
replace parts with genuine Land Parts only.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Kubota dealer for touch-up
paint. Paint is available in aerosol can, quarts, and
gallon sizes. See chart below.
4. A light coating of oil or grease may be applied to the
lower wear areas in lieu of paint to minimize
oxidation.
5. Replace all damaged or missing decals.
6. Store Snow Pusher on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer Snow Pusher life.
Touch-Up Paint
Part No. Part Description
821-070C GLOSS BLACK ENAMEL SPRAY CAN
821-070CTU GLOSS BLACK ENAMEL BOTTLE & BRUSH
821-070CQT GLOSS BLACK ENAMEL QUART
821-070CGL GLOSS BLACK ENAMEL GALLON