Important Safety Information
SGC1060 & SGC1072 Grapples 380-092M
5/18/21
6
35670
35664
35664
Safety Labels
Your Claw Grapple comes equipped with all safety labels in
place. They are designed to help you safely operate your
attachment. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
838-378C
Warning! Pinch Point
or Crushing Hazard
(2-places, 1 on each side)
838-293C
Warning! To Prevent Injury or Death
838-094C
Warning! High Pressure Fluid Hazard
Important Safety Information
