Land Pride SA20 Series, Operator'S Manual

Page: 27 / 38

Section 3: Options & Accessories
Table of Contents
SA20 Hydraulic Post Hole Diggers 317-215M 3/8/18
23
Puff Auger Assembly
Figure 3-9
Motor/Gearbox Assembly
Figure 3-10
70420
Part No. Part Description
317-318A SA 2" X 2" HEX HUB PUFF AUGER
37286
Motor
Gearbox
GPM Decal
Quick Release Coupler Assemblies
Figure 3-8
37283
37284 37285
Small Flat Face Couplers
With 90 Degree Elbows
Part No. 301-505A
Large Flat Face Couplers
With 90 Degree Elbows
Part No. 317-225A
Pioneer Couplers
With Straight Adapters
Part No. 317-226A
Couplers
Refer to Figure 3-8:
SMALL FLAT FACE COUPLERS . . . . . . . . . .301-505A
Small flat face couplers consist of one small flat face
male coupler, one small flat face female coupler, and two
90
o
elbows.
LARGE FLAT FACE COUPLERS . . . . . . . . . .317-225A
Large flat face couplers consist of one large flat face male
coupler, one large flat face female coupler, and two 90
o
elbows
PIONEER COUPLERS . . . . . . . . . . . . . . . . . .317-226A
Consists of two male QD poppet type couplers and two
straight adapters.
Puff Auger (Option)
Refer to Figure 3-9:
The puff auger is a 2" rock drill used for drilling T-post
holes in tough conditions.
Hydraulic Motor/Gearboxes
Refer to Figure 3-10:
HYD MOTOR/GEARBOX LO (6-15 GPM) . . . . 317-216A
HYD MOTOR/GEARBOX MED (10-20 GPM) .317-209A
HYD MOTOR/GEARBOX HI (15-30 GPM) . . . 317-217A
Three motor/gearbox assembly options are offered to
meet your hydraulic flow requirements. All are
interchangeable and do not require adapter kits.
Compare your skid steer/tractor rating with ratings above.
If your hydraulic motor is not compatible with your skid
steer/tractor, you should replace it with one of the
assemblies above that is compatible.
NOTE: The SA20 gearbox is compatible with all
three hydraulic motors. If preferred, you can order
an alternate motor and decal from your nearest
Land Pride dealer to meet your machine flow
requirements. When changing motors, be sure to
also replace flow decal on gearbox.