background image

 Important Safety Information

Table of Contents

SA20 Hydraulic Post Hole Diggers 317-215M

March 8, 2018

4

135500

Danger: Rotating Auger, Stay Away
On all dirt, tree, rock, and puff augers

838-292C

Warning: Electrocute Hazard

Safety Labels

Your Post Hole Digger comes equipped with all safety labels in 
place. They were designed to help you safely operate your 
implement. Read and follow their directions.

1.

Keep all safety labels clean and legible.

2.

Refer to this section for proper label placement. Replace 
all damaged or missing labels. Order new labels from your 
nearest Land Pride dealer. To find your nearest dealer, 
visit our dealer locator at www.landpride.com.

3.

Some new equipment installed during repair requires 
safety labels to be affixed to the replaced component as 

specified by Land Pride. When ordering new components 
make sure the correct safety labels are included in the 
request.

4.

Refer to this section for proper label placement.
To install new labels:
a.

Clean surface area where label is to be placed.

b.

Spray soapy water onto the cleaned area.

c.

Peel backing from label and press label firmly onto the 
surface.

d.

Squeeze out air bubbles with edge of a credit card or 
with a similar type of straight edge.

37263

37263

Important Safety Information

Summary of Contents for SA20 Series







































Reviews: