Introduction
RCF2784 & RCR2684 S/N Rotary Cutters 326-364M
10
7/26/19
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
33038
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product
Application
The medium duty RCF2784 and RCR2684 Rotary
Cutters are built and designed by Land Pride for cutting
on gentle sloping or slightly contoured right-of-ways,
pastures, set aside acres, and row crop fields. The 84"
cutting width and Quick Hitch capability make them
compatible with 60 to 130 horsepower tractors with
540 rpm power take-off speed, and Category lI or lIl 3-
Point or pull-type (RCF2784 only) hitch. Its Category 4
driveline is protected with a 4 plate slip clutch.
The cutters work well in tall grass, weeds, and light brush
up to 3" in diameter and have a cutting height range of
1 1/2" to 12" with a cutting blade tip speed of 14,369 fpm.
These units come with a standard heavy-duty oval stump
jumpers and replaceable skid shoes. Optional front
rubber deflector (RCF2784 only) or front chain guard and
rear chain guards are available.
See
“Specifications & Capacities”
on page 43 and
“Features & Benefits”
on page 46 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology:
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
