Introduction
11/27/18
6
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your 3-Way Rear Blade have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
3-Way Rear Blade. If for any reason you do not
understand any part of this manual or are not satisfied
with the service received, the following actions are
suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
NOTE:
A special point of information that the
operator should be aware of before continuing.
17837
Land Pride welcomes you to the growing family of new
product owners. This 3-Way Rear Blade has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this machine.
Application
The Land Pride RBT55 Series 3-Way Hydraulic Rear
Blades are built tough from the ground up for applications
ranging from landscaping, construction, snow removal,
feedlot cleaning, and all-around farm use.
They are designed for Category II or III 3-Point hitch
mounting, attachment to tractors in the 90 to 180 hp
range, and are Quick Hitch compatible. The blade with its
reversible cutting edge can be angled left or right up to
45
o
, the ends can be tilted up or down by as much as 15
o
,
and the whole blade can be offset to the left or right by as
much as 33". The blade can also be rotated 180
o
for
blading in reverse with same angling, tilting, and offset
capabilities. A retractable park stand is included to
accommodate easier blade removal, storage, and
reattachment.
Available accessories includes manual or hydraulic
operated single or dual gauge wheel for good depth
control, end plates for holding material, skid shoes for
blade protection, hardened wear edge plates for
extended moldboard life and manual angling, offset, and
tilting links for tractors with only one or two duplex outlets.
See “
Specifications and Capacities
”
“
Features & Benefits
” on page 26 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
