Section 2: Accessories
RCR1242, RCR1248, RCR1260 & RCR1272 Rotary Cutter 326-047M
2/7/20
18
Replaceable Skid Shoes (Accessory)
For RCR1260 & RCR1272 Cutters
Refer to Figure 2-1:
WARNING
!
To avoid serious injury or death:
Excessive wear on skid shoes can damage side panels, cause
inadequate operation of cutter, and create a safety hazard.
Always replace skid shoes at the first sign of wearing thin.
Replaceable skid shoes may be purchased for the
RCR1260 and RCR1272 to extend the wear life of the
cutter built in skids. See your nearest Land Pride dealer to
order skid shoes.
1. Attach skid shoes (#1) to the cutter’s side panels with
3/8" plow bolts (#2) and 3/8" hex flange locknuts (#3)
as shown in Figure 2-1. Tighten locknuts to the
correct torque.
2. Once installed, check skid shoes and plow bolts for
wear frequently and replace as needed.
RCR1260 & RCR1272 Skid Shoes
# Part No. Part Description
326-120A SKID SHOE KIT (Consist 2 skid shoes, 6 plow
bolts and 6 locknuts.)
1 326-221D SKID SHOE
2 802-603C PLOW BOLT 3/8-16 x 1" GR5
3 803-198C NUT HEX WHIZ 3/8-16 PLT
Skid Shoe Replacement
Figure 2-1
30294
Section 2: Accessories
