![Land Pride RCM3615 Operator'S Manual Download Page 45](http://html1.mh-extra.com/html/land-pride/rcm3615/rcm3615_operators-manual_3650998045.webp)
Section 5: Maintenance & Lubrication
RC3615 and RCM3615 Series 2 S/N Rotary Cutters 330-502M
12/12/18
41
Spring Shock Absorbers
Skid Shoes
CAUTION
!
To avoid minor or moderate injury:
Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard.
Two skid shoes are mounted on the center section and
one skid shoe mounted on each wing section. Check all
skid shoes for wear and replace if necessary. Order only
genuine Land Pride parts from your local Land Pride
dealer.
Wing Skid Shoes
Replace wing skid shoes as follows:
1.
Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2),
and left-hand skid shoe (#1) as shown.
2. Plow bolts (#2) should be checked for wear and
replaced if necessary.
3. Attach new left-hand skid shoe (#1) to cutter with
existing 3/8" plow bolts (#3) and secure with 3/8" hex
whiz nuts. Tighten bolts to the correct torque.
4. Repeat for the right-hand wing.
Center Skid Shoes
Replace center skid shoes as follows:
1.
Remove 1/2"-13 hex whiz nuts (#4), 1/2" -13 x 1 1/4"
GR5 carriage bolts (#3), and right-hand center skid
shoe (#1) from the center deck frame (#2) as shown.
2. Attach new skid shoe (#1) to cutter with existing
1/2" hex bolts (#3), and secure with existing 1/2" hex
whiz nuts (#4). Tighten bolts to the correct torque.
3. Repeat steps 1 & 2 for left-hand center skid shoe.
IMPORTANT:
Do not tighten locknuts (#1). They are
preset at the factory to allow spring movement.
Tightening locknuts can damage cutter.
IMPORTANT:
Excessive wear on skid shoes can
Spring Shock Absorber
Figure 5-2
Wing Skid Shoes
Figure 5-3
Center Skid Shoes
Figure 5-4
39747
Part No.
Description
1 331-792H BEVELED SKID SHOE RH
1 331-793H BEVELED SKID SHOE LH
2 802-466C PLOW BOLT, 3/8" - 16 x 1 1/4" GR5
27859
Part No.
Description
1 318-211H CENTER SKID SHOE (RIGHT HAND)
1 318-212H CENTER SKID SHOE (LEFT HAND)
27920