Land Pride RCG3715, Operator'S Manual

Page: 51 / 66

Section 5: Maintenance & Lubrication
RC(M)3715 & RCG(M)3715 Rotary Cutters 334-114M 1/26/21
47
Table of Contents
Cutter Blade Assembly
Figure 5-10
Hitch Wear Points
Before each use, check the wear points for the specific
hitch on your cutter. Replace worn hitch components as
needed. Order only genuine Land Pride parts from your
local Land Pride dealer
Swivel Clevis Hitch Wear Point
Refer to Figure 5-11:
On the Swivel Clevis Hitch, check plate (#1) for excessive
wear. If the thickness of plate (#1) is worn down to 9/16"
or less at the hitch pin hole, the component must be
replaced.
Land Pride Performance Hitch Wear Points
Refer to Figure 5-12:
For the Land Pride Performance Hitch, check plate (#1)
for excessive wear. If the thickness of plate (#1) is worn
down to 1/2" or less at the hitch pin hole, the component
must be replaced.
Check for excessive wear on flat washer (#2). Replace as
needed.
Use 1-11/16"
Socket Wrench
On Blade Nut (#3)
Land Pride Cutter Blade Parts
# Part No. Part Description
318-586A BLADE BOLT KIT
(Includes items 1, 2, & 3 below)
1 802-277C BLADE BOLT 1 1/8-12 x 3 7/16 WITH KEY
2 804-147C WASHER FLAT 1 HARD ASTMF436
3 803-170C NUT HEX TOP LOCK 1 1/8-12 PLATE
4 312-820H DISHPAN WELDMENT . , 15" CTR (COMER)
5 840-273C PLUG LP 3" ID RUBBER
6 820-112C CUTTER BLADE 1/2x4x25 CW LH WING
6 820-137C CUTTER BLADE 1/2x4x25 CCW RH WING
6 820-138C CUTTER BLADE 1/2x4x31 CCW CTR DECK
37579
Bar-Tite Hitch Wear Points
Refer to Figure 5-13:
For the Bar-Tite Hitch, check plates (#1 & 2) for excessive
wear. If the thickness of the plates are worn down to 3/8"
or less at the bolt hole, the component must be replaced.
Check for excessive wear on flat washer (#3). Replace as
needed.
Swivel Clevis Hitch Wear Point
Figure 5-11
Land Pride Performance Hitch Wear Points
Figure 5-12
Bar-Tite Hitch Wear Points
Figure 5-13
72215
70569
70570