21
Section 1: Assembly & Set-Up
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
8/20/21
Hydraulic Hook-up Option (3-Point)
Refer to Figure 1-11 on page 20:
1. Thread hydraulic hoses (#8 & #9) through spring
hose loop (#3) and attach to tractor duplex outlet.
2. Hydraulic cylinder should extend when pushing
control lever. Reverse hook-up if cylinder retracts.
on
Add 7/16" Dia. Hitch Pin Hole
Figure 1-12
Hitch Pin Modification (3-Point & Semi)
Refer to Figure 1-12:
A 7/16" (11 mm) diameter hole must be drilled 1 3/16"
(30 mm) from end of hitch pin (#1) as shown to receive
linchpin (#3) or roll pin (#4). Make sure the hole is
straight, vertical, and passes through the center of the
hitch pin diameter.
Linchpin #3 is used to securing Cat. II lower 3-point arms
outside of the cutter hitch plates.
The Cat. II quick hitch attaches to adapter bushing (#5)
outside the cutter hitch plates. Secure bushing (#5) to
hitch pin (#1) with roll pin (#4)
Item Pt. No.
Description
1
805-485C PIN HTCH C1-C2 10.18 L
2
805-088C PIN, HAIR COTTER 3/16 WIRE DIA
3
805-103C PIN LINCH 7/16 X 1 3/4
4
805-393C PIN ROLL 7/16 X 1 3/8 PLT
5
890-938C ADAPTER QH CAT II LWR 3PT
39673
Drill 7/16" (11 mm) hole
1 3/16" (30 mm) from
end of pin
NOTE:
Linchpin (#3), adapter bushing (#5), and roll
pin (#4) are accessories and can be purchased from
your nearest Land Pride dealer.
