8
Introduction
RCF3684 Rotary Cutters 326-412M
11/13/18
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
30870
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product.
Application
The RCF3684 Rotary Cutters are designed and built by
Land Pride to provide excellent cutting performance on
gentle slopes, slightly contoured right-of-ways, pastures,
set aside acres, row crop fields, and roadsides. Its +84"
cutting width with category II & III three-point hitch is
compatible with 70 to 190 hp tractors or pull type with
50 to 190 hp tractors at 540 rpm power take-off speed.
The three-point hitch is also Quick Hitch adaptable. The
driveline is protected with a 4 plate slip clutch.
The cutter can cut through grass, weeds, crops, brush,
and small trees up to 4" in diameter and has a cutting
height range of 2" to 12" with a cutting blade tip speed of
14,369 FPM. This unit comes with a standard 3/16"
heavy-duty dish stump jumper and replaceable bolt-on
skid shoes. Optional shields for the front are rubber
deflector, single chain guard, or double chain guard.
Optional shields available for the rear are either single or
double chain guard.
See
“Specifications & Capacities”
“Features & Benefits”
on page 48 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology:
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
