Section 2: Assembly of Optional Equipment
RCF3096, RCF3010, & RCFM3010 Rotary Cutters 326-566M
11/8/18
37
Check Chains (Accessory)
For 3-Point & Semi-Mount Cutters
(Available through Land Pride parts department.)
Check chains are used to control the cutting height and
allow the mower to be lowered to the same preset cutting
height effortlessly. Install lower end of check chain (#1) to
the inner hitch ear as shown in Figure 2-8, using the
3/4"-10 x 1 1/2 long bolts (#2), lock washers (#3) and
nuts (#4). Tighten securely. Install chain lugs (#5) on
either side of the tractor top link mount using pin (not
supplied). Cutting height is then set by placing proper
chain link in key slot (#6).
NOTE:
For additional safety in transport, raise
cutter as high as possible, and shorten check chains
to prevent inadvertent falling in transport.
Check Chain Assembly
Figure 2-8
16264
