Section 6: Specifications & Capacities
7/30/20
RC4614 & RCM4614 Rotary Cutters 331-937M
55
Section 6: Specifications & Capacities
RC4614 & RCM4614 Models
Specifications & Capacities
Tractor horsepower
70 to 250 hp
Gearbox horsepower
250 hp splitter
210 hp center & wing
Gearbox oil capacity
6.2 Pints: Divider gearbox
4.7 Pints: Center deck, right-hand deck spindle gearboxes
Gearbox lubrication
Gear lube 80-90W EP
Cutting capacity
3"
Weights
Total machine
Tongue weight
6,125 lbs. (Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan,
without deck ring, CV driveline, and standard clevis.)
2,220 lbs
Blade tip speed
RC4614
RCM4614
Up to 17,000 fpm
Up to 18,000 fpm
Hitch types
Optional self-leveling clevis hitch, LP performance hitch,
bar-tite hitch, pintle hitch, or ball hitch
Hitch jack
Standard (7,000 lbs.)
Cutting width
Overall width
Minimum transport width
13' - 6"
14' - 9 1/4"
9' - 2 3/4" (With cutting height at 2")
Overall length
17' - 8 1/2" (With cutting height at 2")
Deck height
13"
Cutting height*
2" to 12"
Lift hydraulics
Center deck
Right wing
3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Wing folding hydraulics
3" x 12" single-acting hydraulic cylinder complete with hose & fittings.
Wing flex
45
o
up, 20
o
down while cutting.
Deck material
1 - Piece, 10 gauge.
Side skirt material
1/4" plate.
Skid shoes
Wing deck
Center deck
Weight box
Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe
Replaceable: 2 Skid shoes
Reversible & replaceable: 1 Skid shoe
4 Blades (2 per carrier)
1/2" x 4" Heat treated free swinging alloy steel with up lift.
Blade overlap
6"
Blade bolt
Keyed with hardened flat washer & locknut.
Stump jumper / blade holder
Standard: 1" thick diamond blade bar
Optional: 1" thick diamond blade bar with round dishpan
Deck ring
Optional 3/8" formed and welded.
Front & rear guards
Single chain or double chain.
Input driveline
ASAE Cat. 6 with constant velocity u-joint.
Intermediate & wing drivelines
Cat. 5 with slip-clutch
Tire options
6" x 9 x 21" Laminated tires
27" x 7.75" Used aircraft tires with foam filling
29" x 9" Used aircraft tires without foam filling
Number of wheels
5 - Wheel option: 4 on transport axle and one on wing axle.
6 - Wheel option: 4 on transport axle and two on wing axle.
Standard transport axle
Spring-cushioned on center transport axle.
Axle fasteners
1 1/4" Greasable pins
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Colors
Standard color
Optional colors
Beige
Red, Green, or Orange
* Maximum cut height is dependent on tire options selected.
