background image

18

Section 4: Maintenance & Lubrication

QH15 Category l Hitch, & QH20 Category ll Hitch Quick Hitches   320-003M

12/04/15

Table of Contents

17288

Section 4: 

Maintenance & Lubrication

50

Multi-purpose 
spray lube

Multi-purpose 

grease lube

Multi-purpose 
oil lube

Intervals at which 
lubrication is required

Lubrication

Legend

Lubrication Points

Pivot points (QH15 & QH20 only)

Multi-purpose Spray Lube

Quantity = Generously

Maintenance

Proper servicing and adjustments are key to the long life 
of any implement. With careful inspection and routine 
maintenance, you can avoid costly downtime and repair.

After using your QH05, QH15, or QH20 Quick Hitch for 
several hours, check all bolts to be sure they are tight. 
Replace any worn, damaged, or illegible safety labels by 
obtaining new labels from your Land Pride dealer.

!

CAUTION

Do not alter Land Pride equipment or replace parts with other 
brands. Doing so can cause equipment to perform improperly 
and may lead to breakage that can cause bodily injury. 
Replace parts only with genuine Land Pride parts.

Long Term Storage

Clean, inspect, service, and make necessary repairs to 
the hitch when parking it for long periods and when 
parking it at the end of a working season. This will help 
ensure the hitch is ready for use the next time you hook-
up to it.

1.

Remove any dirt and grease that may have 
accumulated on the hitch and moving parts. Scrape 
off compacted dirt and then wash surface thoroughly 

As

Required

with a garden hose. A coating of oil may also be 
applied to unpainted area to minimize oxidation.

2.

Check for loose, damaged or worn parts and adjust 
or replace as needed.

3.

Repaint parts where paint is worn or scratched to 
prevent rust. Ask your Land Pride dealer for aerosol 
touch-up paint. Paint is also available in touch-up 
bottles with brush, quarts, and gallon sizes by adding 
TU, QT, or GL to the end of the aerosol part number.

4.

Replace all damaged or missing decals.

5.

Lubricate as noted under 

“Lubrication Points” 

on 

page 18.

6.

Store Quick Hitch on a level surface in a clean, dry 
place. Inside storage will reduce maintenance and 
make for a longer hitch life.

Land Pride Aerosol Touch-up Paint

Part No.

Part Description

821-002C

PAINT LP BLACK AEROSOL SPRAY CAN

821-054C

PAINT MEDIUM RED SPRAY CAN

821-058C

PAINT GREEN SPRAY CAN

821-066C

PAINT ORANGE SPRAY CAN

Summary of Contents for QH20 Series



























Reviews: