background image

Section 10: Warranty 

Table of Contents

PS1572: Primary Seeder: 313-164M:

11/5/18

29

Warranty

Land Pride

 warrants to the original purchaser that this Land Pride product will

be free from defects in material and workmanship beginning on the date of
purchase by the end user according to the following schedule when used as
intended and under normal service and conditions for personal use. 

Overall Unit:

 One year Parts and Labor

Packer Rollers: 

Considered wear items

This Warranty is limited to the repair or replacement of any defective part by

Land Pride and the installation by the dealer of any such replacement part, and
does not cover common wear items such as blades, belts, tines, etc. Land Pride
reserves the right to inspect any equipment or parts which are claimed to have
been defective in material or workmanship.

This Warranty does not apply to any part or product which in Land Pride’s

judgment shall have been misused or damaged by accident or lack of normal
maintenance or care, or which has been repaired or altered in a way which
adversely affects its performance or reliability, or which has been used for a
purpose for which the product is not designed. Misuse also specifically includes
failure to properly maintain oil levels, grease points, and driveline shafts.

Claims under this Warranty should be made to the dealer which originally sold

the product and all warranty adjustments must be made through an authorized
Land Pride dealer. Land Pride reserves the right to make changes in materials or
design of the product at any time without notice.

This Warranty shall not be interpreted to render Land Pride liable for damages

of any kind, direct, consequential, or contingent to property. Furthermore, Land
Pride shall not be liable for damages resulting from any cause beyond its
reasonable control. This Warranty does not extend to loss of crops, any expense
or loss for labor, supplies, rental machinery or for any other reason.

No other warranty of any kind whatsoever, express or implied, is made

with respect to this sale; and all implied warranties of merchantability and
fitness for a particular purpose which exceed the obligations set forth in this
written warranty are hereby disclaimed and excluded from this sale.

This Warranty is not valid unless registered with Land Pride within 30 days from

the date of purchase.

Section 10: Warranty

IMPORTANT: 

The Online Warranty Registration should be completed by the dealer at the time of 

purchase. This information is necessary to provide you with quality customer service.

Model Number ____________________ 

Serial Number ____________________

Summary of Contents for PS1572



































Reviews:

Related manuals for PS1572