![background image](http://html1.mh-extra.com/html/land-pride/primary-seeders-psn2096/primary-seeders-psn2096_operators-manual_3511111012.webp)
Section 2: Assembly & Set-Up (Optional)
PSN2096 Primary Seeders 313-306M
4/03/08
Land Pride
10
Small Seeds Drive Assembly
Refer to Figure 1-5:
1.
Place decal “Danger Guard Missing” (#18),
“Danger Moving Parts” (#19) and “Seed Rate
Chart” (#20) in locations shown.
2.
Assemble chain guard mounts (#5) with the 1/4”
flange bolts (#8) and flange nuts (#11). Do not tighten
until the complete drive has been assembled and the
chain guard (#16) installs properly. The chain guard
mounts are slotted for easier chain guard mounting.
3.
Install chain idler with welded on spacer (#2) and
chain idler (#3) with 1/2” nut (#9).
4.
Assemble the spacer (#4) and speed change sprocket
assembly (#7) to the 5/8” welded on bolt with the 5/8”
lock washer (#12) and nut (#10).
5.
Assemble the front roller sprocket (#13) and key (#1)
to the front roller shaft.
6.
Install chain (#14) first and then chain (#15). Tighten
chains with idlers (#2) and (#3).
7.
Assemble chain guard (#16). Position chain guard
mounts (#5) where needed and tighten hardware.
20588
Small Seeds Drive Assembly
Figure 1-5