background image

37

Section 7: Features & Benefits

7/31/17

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

Table of Contents

HD25 & HD35 Series

Features

Benefits

3-Point mount Cat. l & ll hitch

Fits a wider variety of tractors by fitting Cat. l & ll

Bucket mount

Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help 
push auger into the ground

Skid/loader hitch mount

Fits skid steer & tractor front loaders with skid/loader hitch mount. 
Auger can be mounted in the center or offset to the right. 
Loader arms can help push auger into the ground.

3-Point yoke: 2 7/8" O.D.

3/16" Wall thickness for strength and durability.

3-Point boom: 
Reinforced 3 1/2" O.D.

7/32" Wall thickness reinforced with 3/8" x 2" bar makes for a strong boom.

Large selection of augers

Variety of Dirt Auger and Rock Auger sizes and styles to suit many applications.

Large selection of Bolt-on 
Rock Heads (accessory)

All sizes of Land Pride HD25 and HD35 Pengo Dirt Augers can be converted to Rock 
Augers with this accessory.

Auger flighting

Constant thickness on 1/4" flighting verses tapered.

Replaceable cast alloy steel 
point with 3 fishtail tips

3 Fishtail tips will last 50% longer than 2 tips. Cast alloy steel point can easily be replaced 
when worn or damaged.

Replaceable dual angle teeth

Dual angle teeth can be changed from 40

o

 to 50

o

 to increase attack angle. Teeth can easily 

be replaced when worn or damaged.

25 Series 

Use with hydraulic systems that pump at 5 –12 GPM, at 1500 – 3500 PSI.

35 Series

Use with hydraulic systems that pump at 10-25 GPM, at 1500 – 3500 PSI.

2" Output shaft 

2" Handles torque loads that can be transmitted from hard ground. Fairly standard size for 
the industry, fits many competitive augers.

5 Year gearbox warranty

Shows our confidence in the gearbox integrity.

Hydraulic hose 

Standard on 3-point Post Hole Diggers and skid/loader mount Post Hole Diggers.
Optional on bucket mount Post Hold Diggers due to distance varying on tractor models.

6", 9", 12", & 18" Diameter 
auger options

Wide range of auger diameters to choose from.

48" Auger Length

Auger is provided in industry standard length.

Section 7: Features & Benefits

Summary of Contents for Post Hole Diggers HD25















































Reviews: