63
Section 8: Maintenance & Lubrication
NTS2607, NTS2609, & NTS2611 No-Till Seeder 329-141M
9/10/20
Grass Seed Rate Adjustment
Figure 8-6
Grass Seed Cup
Figure 8-7
Small Seed Rate Adjustment Lever & Seed Cups
Figure 8-8
Grass Seed Rate Adjustment Lever:
DO NOT operate seeder with seed rate adjustment
lever set on 0.
39026
39026
To clean out seed, fully open gate by rotating door
handle to this position. DO NOT open cups to the
widest position with seed in the box unless complete
clean out is desired.
Four-Position Door Handle
Shown in it Highest Position
39025
Small Seed Rate Adjustment Lever:
DO NOT operate seeder with seed rate adjustment
lever set on 0.
Small Seeds Seed Cup
39027
5. Lubricate all grease fittings and roller chains as noted
under Lubrication Points starting on page 67.
6. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
\
7.
Replace all damaged or missing decals.
8. Store seeder on a level, hard surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer seeder life.
9. Follow all unhooking instructions. Refer to
Ordering Replacement Parts
Land Pride offers the NTS Seeder in Orange with black
highlights. When ordering Orange, the suffix number 82
must be added at the end of the part number. Black parts
can be ordered without the suffix number.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is Orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
Land Pride Touch-up Paint
Part No.
Part Description
821-066C
PAINT ORANGE SPRAY CAN
821-070C
PAINT GP GLOSS BLACK SPRAY CAN
82 . . . . . . . Orange
