Kit Assembly Instructions
4
L02 Third Function Valve Kit Assembly Instructions Manual No. 380-366M
2/2/22
Connecting Third Function Valve
Hydraulic Hoses
Third Function Valve Ports “P” & “T” Hydraulic Hoses
Figure 1-5
Attaching Hydraulic Hose from Port “P” to
Outlet Block
Refer to Figure 1-5 & Figure 1-6:
1. Attach hydraulic hose (#23) from port “P” on third
function valve (#20) to “PUMP” port on tractor’s outlet
block (D), then tighten hose to prevent leakage.
2. Secure hydraulic hose (#23) with cable-tie (#4) to
pre-existing hydraulic hose (F) at the location shown
in Figure 1-6.
Attaching Hydraulic Hose from Port “T” to
Loader Valve
Refer to Figure 1-5 & Figure 1-7:
1. Connect hydraulic hose (#30) from port “T” on third
function valve (#20) to “PUMP” port on tractor’s
loader valve (E), then tighten hose to prevent
leakage.
2. Secure hydraulic hoses (#23 & #30) together with a
cable tie (#4) at the location shown in Figure 1-7.
3. Secure hydraulic hose (#30) with a cable-tie (#4) to
pre-existing hydraulic hose (G) on the loader valve at
the location shown in Figure 1-7.
NOTE:
Identification letters have been engraved
next to each port on the third function valve.
P T
PORTS
E
D
Hose (#30) to
“PUMP” port on
loader valve (E).
Hose (#23) to
“PUMP” port on
outlet block (D).
76113
R
L
Hydraulic Hose from Port “P” to Outlet Block
Figure 1-6
Hydraulic Hose from Port “T” to Loader Valve
Figure 1-7
D
23
Pump port
Cable tie (#4)
for hose (#23).
Secure here.
76118
F
76115
30
23
Cable tie (#4)
for hoses
(#23 & #30).
Secure here.
Cable tie (#4)
for hose (#30).
Secure here.
E
Pump port
G
