Land Pride Disc Harrows DH3510, Operator'S Manual

Page: 33 / 44

Section 5: Maintenance & Lubrication
Table of Contents
DH3510 & DH3512 Disc Harrow 322-251M 12/7/18
29
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the Disc Harrow and moving parts.
Scrape off compacted dirt and then wash surface
thoroughly with a garden hose.
2. Inspect all nuts for tightness. Torque loose nuts to the
torque value listed on page 38.
3. Inspect all bearings for wear. Replace any worn out
bearings.
4. Clean dirt, oil, and grease from areas where paint
has been worn, chipped, or scratched. Prime bare
metal surfaces after cleaning and repaint to prevent
rust. Ask your dealer for Land Pride aerosol touch-up
paint. Paint is also available in touch-up bottles with
brush, quarts, and gallon sizes by adding TU, QT, or
GL to the end of the aerosol part number.
5. Replace any decals that are worn or damaged.
6. Lubricate Disc Harrow per the Lubrication Section
starting on page 30 to keep moisture out of moving
components. Be sure to lubricate Spring Adjuster
Tube as noted in the section to prevent moisture
from collecting in the bottom of the tube and freezing.
7. Spray cutting blades with a rust inhibitor or paint to
prevent rust.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN