background image

Section 6: Features & Benefits 

Table of Contents

9/25/18

BB1560, BB1566, BB1572, BB2560, BB2566, BB2572, BB2584, &  BB2596  Fixed  Bar  Box  Scraper  303-082M

15

Section 6: Features & Benefits

BB15 & BB25 Series

Features

Benefits

5/16" & 3/8" Heavy side panels

Built heavy to handle the tough jobs.

Square tubing shank support

Many competitors use angle iron. Box tubing is stronger. 

Clevis -type lower 3-point hitch

Much stronger than pin type hitch.

4 Position heat treated 
spring steel shanks

Offers flexibility for deep to shallow settings and Heat-treated for longevity.

Working widths

15 Series: 60", 66" & 72"
25 Series: 60", 66", 72", 84" & 96"

horsepower Range

15 Series: 17-40 horsepower
25 Series: 25-55 horsepower

Roll-formed moldboard 

Roll-formed moldboard keeps materials flowing which puts less drag on the Box 
Scraper, resulting in lower horsepower requirements and faster working conditions.

17" Moldboard height 

High material capacity.

Moldboard 

Heavy moldboard with precise roll holds its shape under heavy loads.

Heat treated dimpled-on tips

Easy to replace tips that are heat treated for toughness.

Heat-treated, reversible, and 
replaceable cutting blades

Heat-treated for hardness. Reversible so both edges can be used before replacing the 
cutting blades.

Rear backfill blade

Rear backfill blade allows for backfilling trenches or foundations.

Warranty

One year parts & labor.

Category 1 3-point hitch
with Quick Hitch capability

Fits a wide variety of tractors. 
Quick Hitch capability allows for easy hook-up.

Heavy 4" x 4" X 5/16" front beam 
with 5/16" x 1" shank hole 
reinforcement

Reinforcement adds additional strength to shank tube right behind shank where 
maximum pressure is applied.

Strong Bucket Reinforcement
BB15Series

BB25 Series

Two welded braces extending from front to rear of bucket help keep the Box Scraper 
square under heavy loads.

Two welded braces extending from front to rear of bucket plus welded gussets 
between the side panels and moldboard provide exceptional strength for keeping the 
Box Scraper square under heavy loads.

*Always follow manufacturer instructions*

*AAA Rent-All 225-291-1356*

Summary of Contents for BB1560























Reviews: