Land Pride 945551+, Operator'S Manual

Page: 53 / 56

49
Section 8: Troubleshooting
9/6/17 RC2512 Series 2 S/N Rotary Cutters 330-725M
Table of Contents
Excessive side skid wear
Soil abrasive Adjust cutter height.
Cutting too low Raise cutting height.
Excessive vibration
Driveline bent Replace driveline or distribution shaft.
Blade carrier bent Replace blade carrier.
Blade broken Replace blade.
Blade will not swing Inspect and unlock blades.
power take-off not operating at
full speed
Increase power take-off speed to 540.
Blades have unequal weight Replace each pair of blades on affected carrier.
Wing cylinder movement too slow Orifice is plugged Remove elbow fitting and unplug orifice.
Troubleshooting Chart
Problem Cause Solution