Land Pride 3P1006NT Operator'S Manual Download Page 56

Page: 56 / 92

Options

Table of Contents

3P1006NT 313-521M

2019-07-18

Options

Acre/Hectare Meter

A digital acremeter is standard on 3P1006NT drills,

programmed for the revs/area of the 3P1006NT, and in

the units of measure typical for the destination. Order

one of the following if you prefer alternate units of

measure.

Agitator, Main Seed Box

An optional agitator can be added to the main seed box.

It stirs the seed directly above the metering cups,

separating soybeans that are sticky with innoculant, and

helping prevent bridging of light, fluffy seeds (this is not a

substitute for the optional Native Grass seed box).
If the drill has only a main seed box only, or has Dual

Seed

or Native Grass as the only optional box, order the

“W/DRIVE” kit to obtain the necessary accessory drive

components.
If the drill has Fertilizer or Small Seeds, or any

combination thereof, order the “W/O DRIVE” kit.

Coulter Blades

The standard coulter blades on the 3P1006NT drill are

17 in. (43.2 cm) 820

156C Turbo or 820

018C Fluted.

Available replacement and alternate blades include:

Description

Part Number

U.S. Customary

891

013C

Metric

891

014C

27378

1. An agitator is standard in the Dual Seed box.

Description

Part

Number

3P1006NT AGITATOR KIT W/DRIVE

118

970A

3P1006NT AGITATOR KIT W/O DRIVE

118

971A

12682

Description

Part Number

50 Convolution 5/16 Fluted

820

018C

12 Convolution 3/4 Wavy

820

082C

24 Convolution 5/8 Wavy

820

116C

20 Convolution 5/8 Turbo

820

156C

28383

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands