Land Pride 315-507M, Operator'S Manual

Page: 39 / 58

Section 5: Maintenance & Lubrication
Table of Contents
AFM4211 All-Flex Grooming Mower 315-507M 3/8/23
35
V-Belt Installation
CAUTION
!
To avoid minor or moderate injury:
The belt drive system is under spring tension. Use care when
servicing the system to avoid injury caused by forces built up
in the spring.
Refer to Figure 5-1 & Figure 5-2:
These illustrations are also on the labels located on the
top of the mower decks.
1. Remove the right-hand and the left-hand belt covers.
2. Refer to Figure 2-1 on page 23. Disengage belt
tension by turning the nut on the spring loaded eye
bolt (#1) until belt tension is released.
3. Replace old belt with new belt as shown in
Figure 5-1 or Figure 5-2 below depending on blade
rotation.
4. Be sure the belt is positioned in all the pulley grooves
Correctly. Tighten eyebolt nut to apply tension to the
new belt.
5. Refer to Figure 2-1 on page 23 to check belt tension.
6. Reinstall all belt covers and secure in place with
hardware.
V-Belt Installation (CW Blade Rotation)
Figure 5-1
V-Belt Installation (CCW Blade Rotation)
Figure 5-2