LANCOM VP
-
100
쮿
Chapter 1: Installation
11
EN
쐃
Connector for the supplied power adapter
쐇
Switch port for the LAN connection
쐋
Switch port for connecting an additional network device
쐏
Headset connector for the microphone plug
쐄
Headset connector for the headphone/loudspeaker plug
1.4
Hardware installation
Installation of the LANCOM VP-100 involves the following steps:
햲
LAN
– First of all connect your LANCOM VP-100 to the LAN. Plug in one
end of the supplied network cable to a LAN connector on the device
���
,
and the other end into an available network connector socket in your local
network (a free socket on a switch or hub).
햳
Connect the telephone handset
– attach the short end of the spiral
telephone cable to the handset end and the long end to the telephone
socket on the underside of the device. Insert the non-spiraled portion of
the handset cable into the recessed channel.
햴
Power supply
– The socket
쐃
is for connecting the supplied power
adapter.
Use only the supplied power adapter! The use of the wrong power
adapter can be of danger to the device or persons.
햵
Connect further network devices
– You can optionally connect further
network devices such as your PC or notebook to the second switch port
on the LANCOM VP-100 to share a single network connection.
햶
Connect the headset
– You can optionally connect a headset to the
LANCOM VP-100 so that your hands are free when conducting calls.
Ensure that you use the right connectors for the microphone and
loudspeaker.
Your LANCOM VP-100 is now ready to operate. With an unconfigured device,
the display presents the LANCOM Easy Setup.
Summary of Contents for VP-100
Page 1: ...LANCOM VP 100...
