LANCOM OAP
-
54
-
1 Wireless – LANCOM OAC
-
54
-
1 Wireless
Chapter 2: Installation
17
EN
The following can be displayed for WLAN link:
���
ETH
LAN connector status:
2.3.2
Connectors of LANCOM OAP-54-1 Wireless and LANCOM OAC-
54-1 Wireless
The connections and switches of the LANCOM OAP-54-1 Wireless and
LANCOM OAC-54-1 Wireless are located on the bottom side.
쐃
Earth cable connector.
쐇
Connector for serial configuration cable and reset plug (see 'The reset
function').
쐋
Aux connector for external antennas. Diversity antennas are connected to
the Aux connector.
Off
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
Green
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Green
Inverse flashing
Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the input sensitivity.
Green
Blinking
DFS scanning or other scan procedure.
Off
No networking device attached
Green
On (perma-
nently)
Connection to network device operational, not data traffic
Green
Flickering
Data traffic
쐏
쐄
쐂
쐋
쐃 쐇
