LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Chapter 2: Installation
21
EN
Operational?
– After a short device self-test the Power LED will be per-
manently lit green resp. will blink alternately red and green as long as no
configuration password has been given.
2.4.2
LANCOM IAP- 54 Wireless
Wall mounting
Fit the wall-mounting bracket
with the help of the two M6 hexagonal
screws
to the reverse side of the housing.
Mount your LANCOM IAP-54 Wireless on the wall with suitable fixing
screws/bolts
in the location. The wall-mounting screws are not sup-
plied as standard.
Wall mounting
Pole mounting
Place the hose clip
that is best suited to the size of your pole around
the pole-mounting bracket
. Two hose clips for posts of differing diam-
eter are supplied as standard.
Fix the pole-mounting bracket
with the two M6 hexagonal screws
to the reverse size of the housing.
Finally, mount your LANCOM IAP-54 Wireless with the hose clip
in the
position required on the post.
