LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Chapter 2: Installation
15
EN
WLAN Link
Gives information about the Wireless LAN access of the internal wireless net-
work adapter of the base station.
The WLAN link display can assume three different conditions:
WLAN Data
Gives information about data traffic in the Wireless LAN access.
The wireless link display can assume three different conditions:
LAN Link
Condition of the LAN interface:
LAN Data
Indicating data traffic on the LAN interface:
off
no Wireless LAN adapter found
green
Wireless LAN adapter ready for use
green
blinking
activity in the Wireless LAN (blink frequency indicates
the number of registered stations)
off
no data traffic
green
flickering
data traffic
red
flashing
error in the Wireless LAN (e.g. sending error due to a
bad connection)
off
no network device connected
green
constantly on
network device connected; transfer rate 100 Mbps
green
regularly blinking
connection establishing DSL over LAN
green
on with short inter-
ruptions
DSL over LAN active (e.g. PPPoE via LAN access)
orange
network device connected; transfer rate 100 Mbps (The
device cannot function as directed, since a 10 Mbps fast
connection is too slow for a 54 Mbps fast WLAN data
transmission in the LAN.)
off
no data traffic
green
flickering
data traffic
