LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Chapter 3: Basic configuration
29
EN
LANconfig automatically detects the new LANCOM 54 Wireless in the
TCP/IP network. Then the setup wizard starts that will help you make the
basic settings of the device or will even do all the work for you (provided
a suitable network environment exists).
If the setup wizard does not start automatically, start a manual search
for new devices on all ports (if the LANCOM 54 Wireless is connected
via a serial port) or in the network (
Device
Find
).
If you cannot access an unconfigured LANCOM 54 Wireless, the prob-
lem may be due to the netmask of the LAN: with less than 254 possi-
ble hosts (netmask > '255.255.255.0'), please ensure that the IP
address 'x.x.x.254' is located in your own subnet.
If you have chosen automatic TCP/IP configuration, please continue with
Step
.
If you would like to configure the TCP/IP settings manually, assign an
available address from a suitable address range to the LANCOM 54
Wireless. Confirm your choice with
Next
.
Specify whether or not the router should act as a DHCP server. Make your
selection and confirm with
Next
.
In the following window, specify the password for configuration access.
Note that the password is case-sensitive and ensure that it is sufficiently
long (at least 6 characters).
In addition, you may specify whether the device may only be configured
from the local network or whether remote configuration via the WAN (i.e.
a remote network) is also permissible.
